Stainless Steel Spring Washers,Steel Circlips,Steel Spring Washers,Carbon Steel Circlips

Profile /Shaped Wires

Shaped wires, also known as solid profiles, allow achieving complex geometries and cross-sections. These wires are manufactured from stainless steel ,high carbon steel and mild steel wires as per the customers’ specific requirement, in Flat, Square, Triangular, Half round and Trapezoidal shapes.

The profile of the wires can be adjusted to meet customers actual needs. Wires can be supplied in annealed and drawn finish. These wires find application in automobile sector for manufacturing of washers, circlips, springs, wiper, arms, blades, auto cables (inner and outer), kitchen accessories, utensils, Flat, Square, Triangular, Half round and Trapezoidal shapes Etc.

Turk Head Assembly

Specifications

Cross Section	Thickness		Thickness: Width	Corners
	Min.(m.m)	Max.(m.m)	Max.
Flat	0.50	0.90	7 times	Natural/Sharp
	1.00	2.00	6 times	Natural/Sharp
	2.10	3.00	4 times	Natural/Sharp
Cross Section	Thickness x Width		Thickness:Width	Corners
	Min.(mm)	Max. (m.m)	Max.
Square	0.7 x 0.7	8.0 x 8.0	-	Round/Sharp
Rectangular	0.5 x 0.9	6.0 x 10.0	-	Round/Sharp
Trapezoidal	1.2 x 1.8	6.0 x 10.0	-	Natural/Round/Sharp
Cross Section	Thickness/Radius		Thickness: Width	Corners
	Min.(mm)	Max.(m.m)	Max.
Half Round	1.4/0.7	10.00/5.00	4 times	Natural/Round/Sharp

Wiper Arms

Send Enquiry

Products made from Shaped wires.

Stainless Steel Spring Washers, Springs

These are shaped wires in Square, Rectangular or Trapezoidal cross section manufactured from high carbon steel generally conforming to EN-42B/En-42C. The wires are custom built for the taper required. The wires are supplied in Drawn & Annealed finish. These wires are used in the manufacture of steel springs, stainless steel spring washers and snap rings.

Specifications

Cross section	Size (mm)	UTS(kg/mm2)	Edges	Taper Angle
Square	0.8 x 0.8 to 8.0 x 8.0	60-90	Natural / Round / Sharp	-
Rectangular/ Trapezoidal	0.9 x 0.5 to 10.0 x 6.0	60-90	Natural / Round / Sharp	0 or 3-5,or as desired

Packing
The spring washer wires are supplied in 450-500mm. I.D coils with a coil weight of 50-250 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian

Tolerance on Thickness
± 0.05 mm and Width : ± 0.05 mm

Send Enquiry

Circlips

These are shaped wires in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42C/ EN-42J. The wires are custom built to suit customers’ actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications

Cross section	Size (mm)	UTS(kg/mm2)	Edges
Square/ Rectangular	2.3 x 1.2 to 10.0 x 4.0	60-90	Natural / Round / Sharp

Packing
The circlip wires are supplied in 450-500mm. I.D coils with a coil weight of 50-200 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Tolerance on Thickness
± 0.05 mm and Width : ± 0.10 mm

Send Enquiry

** These are regular sizes that we manufacture. Besides them, we can custom made different sizes and finishes as per the customers’ requirement.

Product Range