Bansal Wire Industries Ltd.

Call - +(91)-(11)-23651891
Between 09.00 to 19:00 hrs (IST)

no follow up calls

Grades & Finishes

Client Testimonials

Stainless Steel Wires & Bars

High & Low Carbon Steel Wires

Cable Armouring Wires & Strips

Galvanized Wires

Bansal Wire Industries Ltd.

Stainless Steel Wires & Bars

High & Low Carbon Steel Wires

Cable Armouring Wires & Strips

Galvanized Wires

Profile / Shaped Wires

Stainless Steel Wires & Bars

High Carbon & Low Carbon Steel Wires

Spring Steel Wires

Spring Washers Wires

Galvanized Steel Wires

Bearing Steel Wires

Mild Carbon Steel Wires

Conveyor Belt Wires

Cable Armouring Wires & Strips

Galvanized Wires

Profile /Shaped Wires

Home » Products » High Carbon & Low Carbon Steel Wires

High Carbon & Low Carbon Steel Wires

Bansal Wire Industries Ltd. (BWIL) manufacture High Carbon Steel Wires in sizes ranging from 0.30mm to 6.00mm in carbon 36 to 85. We also manufacture various sizes in Square, Rectangular, Trapezoidal cross sections from 0.8 x 0.8 mm to 10.0 x 6.0 mmin different carbons. We offer wires in various finishes i.e. annealed (Patented & Spherodise annealed), hard, coated (Phosphate & Oiled condition), and clean surface. All properties like hardness, tensile strength, size tolerance, coil weight etc. are maintained as per customers’ specification.

BWIL, manufactures Low Carbon Mild Steel Wires in sizes ranging from 0.40mm to 12.00mm in round wires. We also manufacture various sizes in Square, Rectangular, and Trapezoidal cross sections. We offer mild carbon steel wires in H.B., H.H.B., Welding Electrode Quality, Annealed wires.

The High & Low Carbon Steel Wires, by BWIL, are used to manufacture automotive products, Balls & Taper roller Bearings, Braiding hoses, Chains, Conveyor belts, Filters, Free cutting wires, Fasteners, Screws, Bolts, Needles, Spokes, Springs, Tying wire, Wire ropes ,wire mesh etc. Annealed wires are used for redrawing also.

Following are some of the special utility and industrial products, made out of our wires. Besides these, lot of other general engineering products are made from our wires.

1 | 2 | Next »

Spring Steel Wires

Spring Steel wires are cold drawn wires made from unalloyed high carbon steel. These wires find application in automobile, cycle and other industrial equipments. These wires are generally supplied in phosphate and oiled condition. We can supply wires to specific customer requirement within the specifications

Specifications:

Diameter :- Range 0.30 mm to 6.0 mm**.
Grades :- AISI 200, 300, 400
Uses :- Cold formed helical springs, spring rings and wire forms.
Packing :- The wire coils are supplied in weight of 10-250 kgs., depending on size of wire. Spring Steel Wires are normally oiled and packed with polythene and Hessian.

Rope Wires

Bwils’ wires for Ropes are cold drawn wires made from unalloyed high carbon steel. These wires find application in construction, mining, shipping and various other heavy industries.

We can supply wires in four grades of steel wires to specific customer requirement within the specifications .

Specifications:

Diameter :- Range 0.30 mm to 6.0 mm**
Grades :- IS: 1835-1976.
Uses :- Wire ropes
Packing :- The wires are supplied in weight of 10-250 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Spring Washers Wires

These are shaped wires in Square, Rectangular or Trapezoidal cross section manufactured from high carbon steel generally conforming to EN-42B/En-42C. The wires are custom built for the taper required. The wires are supplied in Drawn & Annealed finish. These wires are used in the manufacture of springs, spring washers and snap rings.

Specifications:

Cross section	Size (mm)	UTS(kg/mm2)	Edges	Taper Angle
Square	0.8 x 0.8 to 8.0 x 8.0	60-90	Natural / Round / Sharp	-
Rectangular/ Trapezoidal	0.9 x 0.5 to 10.0 x 6.0	60-90	Natural / Round / Sharp	0 or 3-5,or as desired

Packing:
The spring washer wires are supplied in 450-500mm. I.D coils with a coil weight of 50-250 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian

Tolerance on Thickness
± 0.05 mm and Width : ± 0.05 mm

Circlip Wires

These are shaped wires in Square or Rectangular cross section manufactured from high carbon steel generally conforming to EN-42C/ EN-42J. The wires are custom built to suit customers’ actual requirements. These wires are supplied in Annealed finish. These wires are used in the manufacture of lock circlips used for locking shafts.

Specifications:

Cross section	Size (mm)	UTS(kg/mm2)	Edges
Square/ Rectangular	2.3 x 1.2 to 10.0 x 4.0	60-90	Natural / Round / Sharp

Packing:
The circlip wires are supplied in 450-500mm. I.D coils with a coil weight of 50-200 kgs., depending on size of wire. The coils are oiled and packed with polythene and Hessian.

Tolerance on Thickness:
± 0.05 mm and Width : ± 0.10 mm

Galvanized Steel Wires (auto cables/ steel wire ropes/helical springs)

These wires are patented galvanized drawn wires manufactured from high carbon steels. These wires are used for manufacture of auto cables, steel wire ropes, cold formed helical springs and wire forms as per IS:4454(Part 1), Grade 1 & 2 and also as per IS:1835.

Specifications :
we supply these wires in the range 0.5mm to 3.0**mm.

Packing :
Galvanized spring steel wires are normally packed with polythene & Hessian cloth. The coil weight is generally maintained in range of 10 to 200 kgs. Depending on the size of the wire.

** These are regular sizes that we manufacture. Besides them, we can custom made different sizes and finishes as per the customers’ requirement.

1 | 2 | Next »

Product Range

Stainless Steel Wires & Bars	High Carbon & Low Carbon Steel Wires	Cable Armouring Wires & Strips
Galvanized Wires	Profile /Shaped Wires

Home :: About Us :: Products :: Grades & Finishes :: Infrastructure :: Quality :: Client Testimonials :: Contact Us :: Enquiry